There are tens of thousands of valves spanning TC Energy’s 95,800 km of oil and natural gas pipeline network across North America. (Hundreds of thousands if you count the little ones.) These valves are carefully maintained and inspected to keep our pipelines working safely and smoothly.But how do they work, and why do they matter?
Pipeline shut-off valves perform a similar function to the valves that control the water supply from your kitchen sink, according to Tom Thrall, a valve and operations specialist with TC Energy.“If you needed to rinse something nasty off your hands, and you went to turn your kitchen tap on, and it wouldn’t turn, that could be a real problem,” said Thrall.Shut-off valves are similar. They open or close, turning on or off the flow within the pipeline.“If something happens along a pipeline, we go into emergency shut down,” he said. If the incident were to take place at a natural gas compressor station or oil pump station, the area has to be isolated."The valves that connect the station to the pipeline all have to close, and other valves have to open allowing the product to bypass the station,” Thrall explained.Valves are an important element to the safe operation of a pipeline. Each valve is incorporated into the control system to ensure safe operation. They must be able to open or close within minutes, and sometimes even seconds.
On gas pipeline systems, many valves are designed to automatically close or open, especially during a pipeline emergency. These valves are controlled by complex machines called actuators. Actuators are used on the largest shut-off valves, the ones too large and heavy to be operated by hand, or those that need to work automatically without a technician present.When the actuator gets the signal, either from a drop or increase in pressure or from our 24-hour operations control centre, they are able to open or close a valve as quickly as necessary.“A lot of our maintenance effort is spent not on the valve, but on the actuator that’s sitting on it,” said Thrall, adding that there are instruments and controls, electric, pneumatic and hydraulic systems, and they all need to work on demand.
Numerous things go into the safe and reliable performance of shut-off valves. Experts carefully manage their locations, placing them strategically along pipeline routes to help protect environmentally sensitive areas, such as large bodies of water, or more frequently in higher population areas.Elevation and terrain are very important considerations for oil pipelines because oil is a liquid and is affected by gravity, so it builds pressure when flowing downhill. To accommodate and calculate the pressure in the line, oil pipelines rely on sensors to transmit information to company control centres.Conversely, gas pipelines are not affected by gravity. This means valves are strategically placed to minimize the volumes of gas released when a line is depressurized.“There’s a whole lot that goes into the integrity and maintenance of valves,” said Thrall. “We make sure that when our valve technicians leave their activities for the day, they have confidence that if this valve is called upon to open or close right now, it will do that. The safety and reliability of our pipelines depend on it.”This careful maintenance and strategic planning of valves is just one of the ways TC Energy remains dedicated to our goal of zero incidents.
TransCanada, like all modern pipeline systems, has extensive sensor-based data collection networks.
Pump stations are built at strategic points along a pipeline to maintain a constant flow of oil at a walking-pace speed. Learn more about them here.
TransCanada’s recent donation of a flow computer helped make the miniature pipeline terminal built inside Central Tech’s pipeline and safety training center even more true to how pipelines function in the real world.